Browse Units


Contact Information

Southern
Research Station

200 W.T. Weaver Blvd.
Asheville, NC
28804-3454
(828) 257-4832
(828) 259-0503 TTY

Publication Information

 Evaluate this publication
How Do You Rate This Publication?
  Bookmark and Share       Mail this page

Title: A comparison of sampling methods for a standing tree acoustic device
Author(s): Mahon, Jr. , Jerry M.; Jordan, Lewis; Schimleck, Lawrence R.; Clark, III, Alexander; Daniels, Richard F.
Date: 2009
Source: Journal article Southern Journal of Applied Forestry. 33(2): 62-68.
Station ID: JRNL-SRS-33
Description: One method of evaluating potential product performance is the use of acoustic tools for identifying trees with high stiffness. Acoustic velocities for 100 standing loblolly pine (Pinus taeda) trees, obtained with the transmitting and receiving probes placed on the same face and opposite faces, were compared. Significant differences in velocity between the two methods were found, with velocity determined using the opposite-face method generally dependent on stem diameter, or the amount of wood through which the stress wave must pass. The only opposite-face method in which the velocities did not vary with dbh was for an assumed flight path where the stress wave traveled from the transmitting probe around the circumference of the stem in the outerwood and then down longitudinally to the receiving probe. Variation in velocities from hit-to-hit was 62% less using the opposite-face method compared with the same-face method. It is recommended to use the circumferential opposite-face (Vel_OC) calculation when determining stress wave velocity for a standing tree.
View and Print this Publication (561.98 KB)     Evaluate this publication
Publication Notes: We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain. Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable. You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)
 [ Get Acrobat ] Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility